Results 1 to 1 of 1

Thread: Modified intake for the 34 vw carbs

  1. #1
    Junior Member Bart's Avatar
    Join Date
    Dec 2015
    Location
    Valdez, Alaska
    Posts
    574

    Modified intake for the 34 vw carbs

    I have a couple of intake joints that have been modified to fit the VW 34 carb.
    the inside webbing has been removed & polished, the front has been left on. with the mounting support bracket.

    as seen in the second photo...
    a taper plug can be turned out, to fit in the front, so there is not an dead space, is so desired. And a cover plate, if needed..
    in the plug. 3/8 threads are placed in the end for removal.. and passage holes can be drilled so if needed the vacuum port can be utilized..


    will require a trade out with your stock intake

    PM for more details..
    Attached Images Attached Images   
    Last edited by Bart; 04-30-2020 at 04:47 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •