Results 1 to 3 of 3

Thread: vw jonboat fan boat

  1. #1
    Forum Reader
    Join Date
    Mar 2018
    Posts
    2

    vw jonboat fan boat

    Hello - I just had a few questions for someone and any help would be appreciated!

    I realize this is 2 wrongs - jon boat is not the best hull and a vw engine has a lot to be desired. Years ago I built a 14x36" jon with a tired vw1500 - Askey 48" 28pitch prop- then I bought a 11x6 airboat hull and put the the 1500 on it. I run narrow, shallow, windy log infested rivers and the airboat hull drifted to much. I needed something that tracked better so I fiber glassed ribs onto the bottom similar to a jon boat and that helped. Both of these boats did what I needed and planed out 2 people. I wanted something faster so I built a fresh beefed up buick v6 with a new askey prop. This was just too big for the rivers I ran. It was very fast and planed great but rarely could I open it up, it didn't work well for my application. I wish I could run something bigger but I can't.

    I have a strong vw 1600 and am putting it on a 16x48" 70" beam jon boat. Gross weight including 2 passengers should be right at 1000lbs. I figure with a 16' boat I will have some room to move the bench seat forward or back to get the weight in the right place? This will be a direct drive off the flywheel side. I am checking into props and one prop manufacturer recommended a 62" 24 pitch ...does 62" sounds big for a vw direct? The old props I ran were 48" 28 pitch...this was 30 years ago!
    Any recommendation for prop manufacturers? And should I use wood for a direct drive vw ....thought I read somewhere that I should...

    Thanks!!

  2. #2

    Re: vw jonboat fan boat

    I am working with a 1600 vw also.
    A Catamaran al hull 11'6" x 7' 2"
    I'm trying a 64" wood two blade 32 pitch
    And a 59" 3 blade with #10 pitch blocks.
    About all mine will turn
    Attached Images Attached Images  

  3. #3
    Super Moderator Corky's Avatar
    Join Date
    Jul 2014
    Location
    Susquehanna river, Dauphin, Pa
    Posts
    1,305

    Re: vw jonboat fan boat

    Nothing wrong with a jonboat you can get between obsticals and steer exactly where you need to go...Some areas of the Susquehanna here will only be traveled by a narrow airjon..... It depends on what your preference to materials is for props...Arrowprop seems to be a favorite for wood...warp drive, and IVO are common composite props...
    Last edited by Corky; 03-16-2018 at 11:10 PM.

    Aluminum .120 14' X 76" hull
    Teledyne 4a084-4 engine
    Circle S 1.69:1 reduction
    67" Whirlwind "Razor X" prop



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •