Results 1 to 9 of 9

Thread: 4A-084 Parts wanted!!!

  1. #1
    New Member
    Join Date
    Feb 2018
    Posts
    5

    4A-084 Parts wanted!!!

    Greetings all,

    I am restoring an old genset powered by a 4A-084.... I am looking for any original sheet metal cowlings, carburetor, plug wires, starter.
    Or most anything else one has laying around that is no longer wanted.

    Thanks,

    JMG

  2. #2
    Super Moderator Corky's Avatar
    Join Date
    Jul 2014
    Location
    Susquehanna river, Dauphin, Pa
    Posts
    1,297

    Re: 4A-084 Parts wanted!!!

    Hello and welcome to the site !!..Even though this is an airboat site I'm sure there's members that would enjoy seeing just what you're working with and how the 084 engine is incorporated into this application...Do you have the basic engine ?? If so did you run a compression test on it to see where the cylinder conditions fall ??? I've got a whole crate of NOS parts that have 0 hours on them...You do know that Saturn Surplus has many parts available at very reasonable prices correct?? Their link is at the top right of most pages...
    Anyhow, check out my build thread there's a few pics of the parts take-offs that are available...Most members that bought NOS crate engines will have basically the same spare parts...Cork

    Aluminum .120 14' X 76" hull
    Teledyne 4a084-4 engine
    Circle S 1.69:1 reduction
    67" Whirlwind "Razor X" prop



  3. #3
    New Member
    Join Date
    Feb 2018
    Posts
    5

    Re: 4A-084 Parts wanted!!!

    Thanks for the welcome!!

    I just picked up a complete engine, not sure just the extent of the sheet metal that will come with it. after I get my hands on it i will post for the additional parts I need.

    I will also post a few pics of the unit as the rebuild goes along.

    Thanks,

    JMG

  4. #4
    New Member
    Join Date
    Feb 2018
    Posts
    5

    Re: 4A-084 Parts wanted!!!

    Corky,

    I received the engine I purchased, no sheet metal

    So I am interested in any sheet metal you have, as well as a governor or anything else you don't feel the need to hold on to.

    Thanks,

    Joe

  5. #5
    Super Moderator Corky's Avatar
    Join Date
    Jul 2014
    Location
    Susquehanna river, Dauphin, Pa
    Posts
    1,297

    Re: 4A-084 Parts wanted!!!

    OK joe let me gather the spare parts I have and we'll see what you're interested in...Cork

    Aluminum .120 14' X 76" hull
    Teledyne 4a084-4 engine
    Circle S 1.69:1 reduction
    67" Whirlwind "Razor X" prop



  6. #6
    New Member
    Join Date
    Feb 2018
    Posts
    5

    Re: 4A-084 Parts wanted!!!

    Great, Thanks

  7. #7
    Super Moderator Corky's Avatar
    Join Date
    Jul 2014
    Location
    Susquehanna river, Dauphin, Pa
    Posts
    1,297

    Re: 4A-084 Parts wanted!!!

    OK Joe... Can you post some pics of what you're starting with so we can see just how much is there{or not there}? ... I might not have some of the needed parts but others here could possibly have them...

    Aluminum .120 14' X 76" hull
    Teledyne 4a084-4 engine
    Circle S 1.69:1 reduction
    67" Whirlwind "Razor X" prop



  8. #8

    Re: 4A-084 Parts wanted!!!

    Hi, I'm new to this forum and I've not yet figured out how to post new threads yet, so I'm sorry for not using good thread protocol as of yet. I've been hoarding some engines and parts and I need to move now. I've got some new,some old, some mil overhaul and some parts all 4ao84 and would like to sell. Please spread the word as you can and thanks.
    Stan

  9. #9
    New Member
    Join Date
    Feb 2018
    Posts
    5

    Re: 4A-084 Parts wanted!!!

    Quote Originally Posted by paint flyboy View Post
    Hi, I'm new to this forum and I've not yet figured out how to post new threads yet, so I'm sorry for not using good thread protocol as of yet. I've been hoarding some engines and parts and I need to move now. I've got some new,some old, some mil overhaul and some parts all 4ao84 and would like to sell. Please spread the word as you can and thanks.
    Stan
    Greetings....

    I am looking for any sheet metal for these engines. let me know what you have and what you want for it.

    Thanks,

    Joe

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •