Most of the major airboat manufacturers have those bushings in their parts inventory...I've seen them in black and bright blue...Here's an example at panther airboats... http://www.classicairboats.com/61-61...9256.Item.html
Most of the major airboat manufacturers have those bushings in their parts inventory...I've seen them in black and bright blue...Here's an example at panther airboats... http://www.classicairboats.com/61-61...9256.Item.html
Aluminum .120 14' X 76" hull
Teledyne 4a084-4 engine
Circle S 1.69:1 reduction
67" Whirlwind "Razor X" prop
ok well had an interesting night last night tryied to run the motors i had bought and #1 cyl had 0 compression so pulled the head and the valve seat dropped so i took it off and put the new motor that has was freashly rebuilt by the military and swaped it out and it runs strong so the ultra prop was no good so my dad said here put my razor x on it and wow it sounds like it would run like a raped ape so to day started building on the stand and got the stand finnished and the gas peddle bolted down painted.
11'6 aluminum hull
4A084 engine
1.69 circle-s redrive
RAZOR-X 67'' prop
frogging fun
Wow...I see the two heads in the pics...One of the valve and one of you with the disgusted look... Seriously though, most times you can see valve trouble by the height of the valve stem but that one looks like it's darn near flat with the other valve !!! Amazing it hammered like that could you hear it ??? At least you had an extra engine to get the job done...I like the rig in general lots of cool parts on there ...
Aluminum .120 14' X 76" hull
Teledyne 4a084-4 engine
Circle S 1.69:1 reduction
67" Whirlwind "Razor X" prop
no i didnt hear any thing on that cyl it just ran like crap at idle and didnt have power at all
11'6 aluminum hull
4A084 engine
1.69 circle-s redrive
RAZOR-X 67'' prop
frogging fun
Well got the guages wired up seat bolted down now just hook up the steering and then I believe it’s ready for madden voyage
11'6 aluminum hull
4A084 engine
1.69 circle-s redrive
RAZOR-X 67'' prop
frogging fun
Went and test run it and ran great
https://youtu.be/iV55FXueHk4
Last edited by frogman91; 11-09-2017 at 12:38 AM.
11'6 aluminum hull
4A084 engine
1.69 circle-s redrive
RAZOR-X 67'' prop
frogging fun
Well ran it just alittle bit ago and see what my speed was and it ran a smooth 28.8
11'6 aluminum hull
4A084 engine
1.69 circle-s redrive
RAZOR-X 67'' prop
frogging fun
Excellent !!! It sounds nice and smooth... And looks like you're flying faster than 28.8 !!! I made a quick look through the thread and didn't see it but what are the specs on that hull it seems to do very well for your engine/redrive combo ?...Even the fish like it they were ready to jump in the boat !!
Last edited by Corky; 11-09-2017 at 07:59 PM.
Aluminum .120 14' X 76" hull
Teledyne 4a084-4 engine
Circle S 1.69:1 reduction
67" Whirlwind "Razor X" prop
It an 11’6 aluminum hull alittle over 4’ wide and 6’ at the topthe boat it self probably weight is ima guess 400 lbs empty
11'6 aluminum hull
4A084 engine
1.69 circle-s redrive
RAZOR-X 67'' prop
frogging fun
Bookmarks