auto plug wires for 084

[bgmcl60]

i've been wanting to change my plug wires and decided to do something different. i could never keep the rubber boot on the mag secure. so i cut the steel webbing off the original wire right at the end and punched out the center where the webbing is pressed in and the auto wires fit perfectly through the nut just solder a terminal on the end or wrap it up so it won't ground out at the nut and thats it. i looked for some plastic nuts for the mag but no luck. i seen where duane scarborough had used some on his build. you need to put some orings on the plug wires to jam them so they won't slide out.