Results 1 to 6 of 6

Thread: crankshaft broke on generac

Threaded View

  1. #6
    Member yamahaulerG1's Avatar
    Join Date
    Dec 2009
    Location
    lake Okeechobee, FL
    Posts
    126

    Re: crankshaft broke on generac

    There was a very small part of the break that looked discolored like it might have been cracked before you can see it by the hub on the right side. this motor has seen some wear and tear. before this prop I had a wood prop that broke and I had to run it about 4 miles to get home and at one point I had to cross a floating island of grass with the broken prop and the only way to cross it was full throttle and wiggle the boat across. I'm sure it all added up to the failure. Yes corky this prop is pretty heavy by itself plus my adapter and steel spacer I weighed what's left it's 14lbs. I will use the ultra prop again when I rebuild the cage because it's lighter.
    Attached Images Attached Images  
    Last edited by yamahaulerG1; 12-12-2016 at 01:51 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •