Since running the 084 I've noticed it's hard to get the original valve cover gaskets to seal. I've been using permatex on them but still have trouble will small leaks. The stock gaskets are hard paper-like and leak often. I decided to fix this today. I had a roll of cork gasket material so I used a stock gasket to trace out the gasket on the cork gasket material. This fixes the leak problems. Following is a photo of the gasket I made and a PDF file of the original gasket you can print and use for a template.
Following is a link to the PDF file you can print and use for the template for those that don't have a good gasket to trace.
http://miniairboatassoc.com/084/VCG.pdf
Bookmarks