John's new MiniPro 084

[chuckitt]

I have been on dial-up for the past week and the speed is too slow to upload the water video. My new high speed dish should be installed today. I had to dump sprint because if you go over the 5 geg download the rate is another $ 60.00 per geg.
Thanks, Chuck

[chuckitt]

John called me from New Mexico and said his MiniPro 084 ran 37 mph without doing anything to the carb. He is at 4000 ft elavation. Here at sea level it would only run 31 mph and ran lean at wide open throttle. He said the carb worked fine the way we had it set up. The main jet was drilled to .040 and the air bleed was drilled to .038.
Thanks, Chuck

[Papee]

I forgot about the elevation deal. Glad he's happy. I think the metering rod I'm using has both holes drilled out the same as the inside circumference of the metering rod.

[chuckitt]

Well after i lost the video of the water test, i found it and got it loaded on youtube. Try this link.
http://www.youtube.com/watch?v=ifG_Xi0VqqE
Thanks, Chuck

[Papee]

Chuck sells both the console and foot pedal. He can also get you any Telflex cable in the length you need.