IM LOOKING FOR A USED PROP FOR SALE FOR MY ENGINE IF THERE IS ANYONE OUT THERE WHO HAS ONE FOR SALE ABOUT 60IN GIVE ME A CALL AT 3523177484 GEORGE AND GIVE ME A PRICE THANKS
IM LOOKING FOR A USED PROP FOR SALE FOR MY ENGINE IF THERE IS ANYONE OUT THERE WHO HAS ONE FOR SALE ABOUT 60IN GIVE ME A CALL AT 3523177484 GEORGE AND GIVE ME A PRICE THANKS
georgiboy,
I have a 66" GSC Tech II ground adjustable wooden prop, in like new condition. I bought it with 5 hours of run time on it. I test fit it on my boat, and since then it has been hanging in the shop. This is a left hand rotation prop, with a 75 mm Rotax pattern hub. It uses AN-4 (1/4-28) bolts. At the time I didn't have the correct adapter to bolt it up properly to my Arrow Prop reduction drive, so in these photos is is jury rigged in place.
Here is a link to GSC's web site:
http://www.ultralightprops.com/tech_ser ... adjust.htm
I know "nothing" about Hirth engines. I don't know if this would work for you, or even if you might be interested. I'd let it go at a VERY reasonable price. I have since decided to use a Whirl Wind 67" Mini Prop, so this prop is just hanging on the wall...
Let me know if you are interested.
Duane
A KWAZY old Southerner... and darn PROUD of it.
Airboat Pros MiniPro 116 / Frog Spit
SS rigging - with side by side seating
Teledyne 4A084-4 engine
Solex H30/31 Carb
Arrow Prop 1.73:1 reduction
67" Whirlwind 2 blade Mini Prop
under construction
Hey Duane, it want work. georgiboy needs a right turn prop. His engine has a gear box.
Thanks, Chuck
Hey Chuck,
That's too bad...
I'd have made him a good deal on it. It's just in my way. Oh well.
Thanks,
Duane
A KWAZY old Southerner... and darn PROUD of it.
Airboat Pros MiniPro 116 / Frog Spit
SS rigging - with side by side seating
Teledyne 4A084-4 engine
Solex H30/31 Carb
Arrow Prop 1.73:1 reduction
67" Whirlwind 2 blade Mini Prop
under construction
thanks mr Duane if only it was right i would get it but like mr chuck said i need a right hand rotation thanks if you come across a right one let me no that prop would have probably worked on my briggs engine
Hey georgiboy, I found a 3 blade prop with the pitch blocks that might work on your engine. It looks to be 59 inches. I don't know what brand it is but i think it's just like the one that Papee uses so i think it may work. I think we can sell it for $ 160.00
Thanks, Chuck
Hay DUANE Give me a call I mite be interested in your prop. Dennis 863 206 3994. THANK YOU.
Hey Georgieboy there is a Ivo Magnum for sale here local for $350 if it's in your budget. It's brand new never on anything. It's a 52" three blade RH
Please check out our YouTube channel and subscribe! Our YouTube Channel helps fund the site. Check it out at https://www.youtube.com/channel/UCTv...FrJP7yQVFVZnyA
Dennis,Originally Posted by dwhittaker44
I very much enjoyed talking with you on the phone. Like we discussed on the phone, the IVO prop you have now may be a better choice that my GSC prop would. It's hanging on the wall of the shop, and I do kinda' want to see what it'll do, after I get the boat up and running.
But you DID have some interesting ideas. I won't disclose YOUR ideas here, but I DO encourage you to join in on the forum, and post some pictures of your build. I bet that you and Buster would hit it off well. You both seem to know how to make chicken salad.
Let us know if we can help.
Thanks,
Duane
A KWAZY old Southerner... and darn PROUD of it.
Airboat Pros MiniPro 116 / Frog Spit
SS rigging - with side by side seating
Teledyne 4A084-4 engine
Solex H30/31 Carb
Arrow Prop 1.73:1 reduction
67" Whirlwind 2 blade Mini Prop
under construction
I never got to talk boats with him, all he wanted to do is talk about computers
Please check out our YouTube channel and subscribe! Our YouTube Channel helps fund the site. Check it out at https://www.youtube.com/channel/UCTv...FrJP7yQVFVZnyA
Bookmarks