Results 1 to 14 of 14

Thread: I'll be picking up an 084

  1. #1

    I'll be picking up an 084

    Looks like I found an 084 close by with low hours on it.
    so at least I'll be playing with toys that you peeps are familiar with... so then advice would be very much so available in the forums!! Rather than my freak show unknown, untested ideas.

  2. #2
    KWAZY old Southerner... Duane Scarborough's Avatar
    Join Date
    Feb 2009
    Location
    Wilson, NC
    Posts
    1,688

    Re: I'll be picking up an 084

    Sandman,

    Yay !!! Glad to hear of your find. But it don't matter. Bug engine, ultralight engine, lawn mower engine, antique Gov'mint generator engine. It's all good.

    Duane
    A KWAZY old Southerner... and darn PROUD of it.

    Airboat Pros MiniPro 116 / Frog Spit
    SS rigging - with side by side seating
    Teledyne 4A084-4 engine
    Solex H30/31 Carb
    Arrow Prop 1.73:1 reduction
    67" Whirlwind 2 blade Mini Prop

    under construction

  3. #3

    Re: I'll be picking up an 084

    still plan on doing something with the 042 but I really like the idea of using an air boat to duck hunt in the marshes up here... soon I'll order a hull and get things in motion!! whoohoo!!

  4. #4

    Re: I'll be picking up an 084

    Finally paid for the motor!
    Dusty has been very good to me.
    I hope to go pick it up next weekend!! yay me!
    Now if work hours pick up and the money improves enough... I'll need to find my way to Florida to see Chuck next spring... or maybe I'll do the lake buggy idea... who knows?
    I like the idea of going to Florida and buying one of chucks hulls best!!

  5. #5

    Re: I'll be picking up an 084

    Good news Sandman. But it sure would be nice if you had a hull now so you could build it this winter. Maybe things will work out. Good luck and keep us informed.

    Jim

  6. #6
    Administrator Papee's Avatar
    Join Date
    Jan 2008
    Location
    PA/GA
    Posts
    2,721

    Re: I'll be picking up an 084

    Welcome to the 084 club!!!!!
    Please check out our YouTube channel and subscribe! Our YouTube Channel helps fund the site. Check it out at https://www.youtube.com/channel/UCTv...FrJP7yQVFVZnyA


  7. #7
    KWAZY old Southerner... Duane Scarborough's Avatar
    Join Date
    Feb 2009
    Location
    Wilson, NC
    Posts
    1,688

    Re: I'll be picking up an 084

    Sandman,

    I'm glad you've got the 4A084 paid for and ready to be picked up. So like Papee said, welcome to the club. We need pictures.

    And, I hope that your work picks up soon so that you can get one of Chuck's hulls before long.

    I did not have Chuck do the Frogspit on my hull. Instead, I applied it myself with rollers. I think it came out "O.K.", but it sure would have came out much better if it'd been sprayed on. So, I highly recommend that you have him do that for you.

    Thanks,

    Duane
    A KWAZY old Southerner... and darn PROUD of it.

    Airboat Pros MiniPro 116 / Frog Spit
    SS rigging - with side by side seating
    Teledyne 4A084-4 engine
    Solex H30/31 Carb
    Arrow Prop 1.73:1 reduction
    67" Whirlwind 2 blade Mini Prop

    under construction

  8. #8

    Re: I'll be picking up an 084

    it must take allot of frogs to get enough of that stuff to cover the hull!
    Poor lil fellahs must really need a drink after you've used em up? electrolytes maybe?

    Whats the purpose of the spit?
    I will be using the boat in the marshes and the mud flats... possibly salt water marshes as well... muscle beds are sharp.. probably allot like oyster flats down south.. does the spit add strength? or is it something like a Teflon coat?
    I like the idea of buying one of chucks hulls and I hope he chimes on recommendations.. also you guys use a redrive on your 084 or do you run direct. I know you've all mentioned it a million times but my head is spinning with ideas!
    So.. yeah YAY!! Whoohoo!!

  9. #9

    Re: I'll be picking up an 084

    Hope to make the trip to pick er up next weekend.. but when it rains.. it pours and Money is tight again...
    Soon I'll make the trip to Connecticut and yes... I'll post photo's!!

  10. #10
    KWAZY old Southerner... Duane Scarborough's Avatar
    Join Date
    Feb 2009
    Location
    Wilson, NC
    Posts
    1,688

    Re: I'll be picking up an 084

    I have determined,after much research, that the sole purpose of Frog Spit is to keep the Frogs employed. There's not much worst than to be panhandled by hungry Frogs.

    Nah, Frog Spit is just a coating to make the hull slicker.

    Some are using re-drives, and some are doing direct drives. I guess that the jury is still out on that....

    Good luck with your project.

    Duane
    A KWAZY old Southerner... and darn PROUD of it.

    Airboat Pros MiniPro 116 / Frog Spit
    SS rigging - with side by side seating
    Teledyne 4A084-4 engine
    Solex H30/31 Carb
    Arrow Prop 1.73:1 reduction
    67" Whirlwind 2 blade Mini Prop

    under construction

  11. #11

    Re: I'll be picking up an 084

    Well.. ok I got my motor today!! finnaly!! whoohooo!

    I haven't had a chance to play with it yet but I did go out tonight to turn the fly wheel by hand and I noticed something that has me a bit nervous... well allot NERVOUS...
    When I turn the motor by hand it makes a clink noise that sounds like something inside is broken what could it be?? OMG!! nooooooo.
    I'm hoping that some of you may have some insight on the whats and hows of the motor that could make such a noise geeze.. I'm stunned.

  12. #12
    Administrator Papee's Avatar
    Join Date
    Jan 2008
    Location
    PA/GA
    Posts
    2,721

    Re: I'll be picking up an 084

    Rest easy, that is just the magneto.
    Please check out our YouTube channel and subscribe! Our YouTube Channel helps fund the site. Check it out at https://www.youtube.com/channel/UCTv...FrJP7yQVFVZnyA


  13. #13
    KWAZY old Southerner... Duane Scarborough's Avatar
    Join Date
    Feb 2009
    Location
    Wilson, NC
    Posts
    1,688

    Re: I'll be picking up an 084

    Sandman,

    Yay ! I'm glad you finally got it.

    Calm down, O.K. ? The magneto will make a LOUD snap as you turn the crank over through top dead center.

    The 4A084 has an impulse magneto, that preloads a spring which releases right before TDC to provide an advanced spark. Once the engine is running, you won't hear that.

    It's O.K., O.K.?

    Duane
    A KWAZY old Southerner... and darn PROUD of it.

    Airboat Pros MiniPro 116 / Frog Spit
    SS rigging - with side by side seating
    Teledyne 4A084-4 engine
    Solex H30/31 Carb
    Arrow Prop 1.73:1 reduction
    67" Whirlwind 2 blade Mini Prop

    under construction

  14. #14

    Re: I'll be picking up an 084

    lol goooooood!! thats the sort of answer I was looking for guys.
    Yeah the noise is right up near the mag so I figured it might be the governor or something.
    Maybe tomorrow I'll strip down the shell and get a look at er!
    New toys are cool!
    so this means I can sleep....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •