The reason for the idler is I changed it to a 3" pulley, the normal sizes are 3.65" or 4.14" with a top pulley of 7", 1.69 to 1 or 1.91 to 1 ratio. The larger pulleys have more wrap on them, with...
Type: Posts; User: bowfishn
The reason for the idler is I changed it to a 3" pulley, the normal sizes are 3.65" or 4.14" with a top pulley of 7", 1.69 to 1 or 1.91 to 1 ratio. The larger pulleys have more wrap on them, with...
I ended up using the 4" pulley so I have a 90mm (3.5") pulley I don't need to keep. Anyone interested it is 1.75" wide and has the double 6203 2rs bearings. Will sell for $50.00 shipped TYD in the...
I am still using the original means of belt tension. The idler is not adjustable it is fixed, to take off the belt it requires me to loosen the belt tension by 2 jack bolts that push up from the...
Here is the Idler mounted on the drive in my work area.
4198
Yeah I also ordered a 100 mm pulley of the same thing so I can see which will fit in place better, If I can I will try and use the 100 mm just because it will extend belt life a bit. It will be set...
Ok I found this at http://bestorq.com/Library/TechInfo/techinfo/Idlers.pdf It recommends a minimum back side Idler of 4" for 3VX belts. I have ordered a 3.5" already, it will decrease belt life some...
Thanks for getting back Bart,
HP is 48 hp and 45 ft lbs at 5500 rpm. The drive is 2.66 to 1 it has an 8" pulley on reduction side and 3" pulley on drive. I am thinking about a 3.5" idler, I will...
Does anyone know where I can get info on the minimum size Idler or tensioner pulley size to use with 3Vx banded belts. I see they go quite small with syncro and micro groove belts. Is there any info...
SOLD! Closed Thread
Relisted on E-Bay for $135.00
https://www.ebay.com/itm/153217885760?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
E-Bay auction over so it's ok to contact me here about it.
This is an Item that still has 11.5 hrs left on ebay as of 8:00 am EST. I am not going to relist them there. You can go there at the link below or contact me after the 11.5 hrs
...
OK I have got my 5x12 build finished enough so I was able to test it out. So here is some pictures and info.
4090Side view, 12' x 5' with 6 wide top, 18" sides 1/8" aluminum, Gator Glide bottom...
I searched and searched for a coupon to save on that motor, we called 4 times to Harbor Freight in Littleton NH and was told by 4 separate emplyees they did not have any specials or coupons for the...
For any who are interested until March 31st this coupon code is good for $100.00 off at Harbor Freight 75998876 on the 22 hp Predator motor