Search:

Here's a hull
http://www.southernairboat.com/classifieds/hulls-cages-rigging-trailers-etc/p81243-11-5-x-7-gilleo-hull-and-or-trailer.html

This guy has a 618 rotax on a 10ft aluminum hull.
http://www.southernairboat.com/classifieds/showproduct.php?product=81251

Hi Oran the 116 hull in my opinion is to short of a hull for the 084 with 2 persons onboard, if you'll be riding alone it's a great little set-up or if you're running 2 people in skinny water all the...

Hey Ted where did you buy you air cleaner, do you have an item number?
Nick

Papee with the air filter on at idle it was starting to collect moisture on the intake so I ran a heat collector to the top of the cylinder.

I don't noticed a hesitation at low speed like I did yesterday. Something is going on with the high speed, yesterday when I took it for a test drive my rpm was ranging from 3700-3900, today with me...

I set the choke on the carb as you guys suggested and it idles better and it doesn't smoke.

I did the same with my stock carb held the pedal to fast idle. Does anyone know what size drill bit matches the 130 jet.

Thanks Papee Ted i'll read that article more tonight and see what I can decipher.

When I fire up the engine am I supposed to work the gas pedal while the engine is turning over. That's the only way it would start for me

Ted I read the Automatic Choke Adjustment page and I remembered something from today when my boat was on the trailer. While I had the air filter of I could see the choke lever I watched as the lever...

Papee I don't remember hearing a click but I will listen for it tomorrow. I will also run a ground. Ted I don't quite know which part of the carb where the electric choke coil is situated can you or...

Papee just got back

Got it hooked up filter and all fired her up and she was struggling to idle lots of black smoke from the exhaust. I shut her down and removed the filter to see what was going...

Ted this is part of what I read from this site;http://www.vw-resource.com/jets.html

We have seen advice to the effect that both the main jet and the air correction jet (and maybe others) must be...

Ted are you at sea level?

This is what my brother-in-law is using the starter and ring gear are from a snowmobile.

Anybody hear from Ted on his carb tune?

Ted I noticed the same problem with my vbelt reduction with stock carb and passed it off as belt slippage. With my new cog belt reduction I thought this problem was solved but it still persisted but...

Ted are you on fb because my newphew took a video while I had it running yesterday you can watch it there.

I tighten the bolt enough until the noise went away it took a couple of tries.

Mine was doing the same thing because the 2 nuts came loose so I screwed in the bolt to put a bit of tension on the belt and turned in the first nut snug and then screwed in the second nut and...

I think were all getting real anxious right about now!

where's the video?????

That's awesome Papee will do. Thanks Aerokirk for coming up with the design.

You guys are killing me........ Papee can you make me that bracket that Aerokirk has invented for his carb set-up?