PROP NEEDED FOR A 65HP HIRTH TWO STROKE

IM LOOKING FOR A USED PROP FOR SALE FOR MY ENGINE IF THERE IS ANYONE OUT THERE WHO HAS ONE FOR SALE ABOUT 60IN GIVE ME A CALL AT 3523177484 GEORGE AND GIVE ME A PRICE THANKS

georgiboy,

I have a 66" GSC Tech II ground adjustable wooden prop, in like new condition. I bought it with 5 hours of run time on it. I test fit it on my boat, and since then it has been hanging in the shop. This is a left hand rotation prop, with a 75 mm Rotax pattern hub. It uses AN-4 (1/4-28) bolts. At the time I didn't have the correct adapter to bolt it up properly to my Arrow Prop reduction drive, so in these photos is is jury rigged in place. ;rasta;

http://i252.photobucket.com/albums/h...D/DSCN1366.jpg

http://i252.photobucket.com/albums/h...D/DSCN1367.jpg

http://i252.photobucket.com/albums/h...D/DSCN1368.jpg

http://i252.photobucket.com/albums/h...D/DSCN1369.jpg

http://i252.photobucket.com/albums/h...D/DSCN1370.jpg

Here is a link to GSC's web site:

http://www.ultralightprops.com/tech_ser ... adjust.htm

I know "nothing" about Hirth engines. I don't know if this would work for you, or even if you might be interested. I'd let it go at a VERY reasonable price. I have since decided to use a Whirl Wind 67" Mini Prop, so this prop is just hanging on the wall...

Let me know if you are interested.

Duane

Hey Duane, it want work. georgiboy needs a right turn prop. His engine has a gear box.
Thanks, Chuck

Hey Chuck,

That's too bad... :(

I'd have made him a good deal on it. It's just in my way. Oh well.

Thanks,

Duane

thanks mr Duane if only it was right i would get it but like mr chuck said i need a right hand rotation thanks if you come across a right one let me no that prop would have probably worked on my briggs engine

Hey georgiboy, I found a 3 blade prop with the pitch blocks that might work on your engine. It looks to be 59 inches. I don't know what brand it is but i think it's just like the one that Papee uses so i think it may work. I think we can sell it for $ 160.00
Thanks, Chuck

Hay DUANE Give me a call I mite be interested in your prop. Dennis 863 206 3994. THANK YOU.

Hey Georgieboy there is a Ivo Magnum for sale here local for $350 if it's in your budget. It's brand new never on anything. It's a 52" three blade RH

Quote:

---

Originally Posted by dwhittaker44

Hay DUANE Give me a call I mite be interested in your prop. Dennis 863 206 3994. THANK YOU.

---

Dennis,

I very much enjoyed talking with you on the phone. Like we discussed on the phone, the IVO prop you have now may be a better choice that my GSC prop would. It's hanging on the wall of the shop, and I do kinda' want to see what it'll do, after I get the boat up and running.

But you DID have some interesting ideas. I won't disclose YOUR ideas here, but I DO encourage you to join in on the forum, and post some pictures of your build. I bet that you and Buster would hit it off well. You both seem to know how to make chicken salad. :&&:

Let us know if we can help.

Thanks,

Duane

I never got to talk boats with him, all he wanted to do is talk about computers ;stir;