PDA

View Full Version : Modified intake for the 34 vw carbs



Bart
04-30-2020, 04:05 AM
I have a couple of intake joints that have been modified to fit the VW 34 carb.
the inside webbing has been removed & polished, the front has been left on. with the mounting support bracket.

as seen in the second photo...
a taper plug can be turned out, to fit in the front, so there is not an dead space, is so desired. And a cover plate, if needed..
in the plug. 3/8 threads are placed in the end for removal.. and passage holes can be drilled so if needed the vacuum port can be utilized..


will require a trade out with your stock intake

PM for more details..