Is the piston Diameter 2.25 or is that the bore diameter on the 032? or are they one in the same?
Manual states Bore is 2.25
The reason I'm asking is on this particular motor I might have to go up on the ring size or possibly on the piston size.
After honing my cylinders I've realized that the scratches are much deeper than a hand hone can take care of. Mostly it's been able to remove the glaze but not the scratches.
I have a Machine shop down the street that will save as much material as they possibly can on the cylinders but they suggested I find new pistons that are .010 larger than the existing ones.
I'll post this on the yahoo 032 site as well to see what I can find.